Home
Spa
Benefits
Economy Spas
Luxury Spas
Z-Spas
Spa
Colors
Acrylic Shell
Heating
Insulation
Cabinets
Digital Controls
Hard Covers
Filtration
Ozonators
Spa Chemistry
GFCI Hook-Up
Warranty
Privacy Notice
Contact Us
|
Filtration
|
|
 Maintaining
sparkling clean water with your unit is simple and virtually effortless.
Our pressure-side filter is within easy reach, yet is not visible
while soaking. The pump's power forces all dirty water through
the cartridge. There is no bypass. This assures 100%
clean water enters back into the spa. We use the low speed
of your pump to filter and cleanse your spa water, which proves
effective and more economical than separate circulation pumps
operating 24 hours a day. |
|
| The filtration
system is designed to keep your water clean and safe. Our Exclusive
Vortec Filtration System is designed to feed water to the pump
before it is needed. Most filtration systems require the pump
to pull the water before pushing it back out. This decreases the
life of the pump and reduces the number of gallons per minute
normally circulated. By using our own Vortec Filtration System,
the water is fed into the pump before it is needed. The pump stress
is reduced, extending the life of the pump and increasing the
gallons per minute by up to 30%! For example, a 5 HP pump that
normally would push 282 GPMs has a GPM output of 326. By changing
the filtration system, we have increased water flow by 44 gallons
per minute! This has proven to keep the water cleaner while extending
the life of the pump. All our Vortec Filtration Systems are designed
to be hassle free. They load from the top without de-pressurizing
the system or purging. The filtration system does not need to
be disassembled. Simply remove the basket to gain access to the
filters. These systems are also designed to drawwater from the
lowest points of the spa. This allows the water to be filtered
not only from the surface of the water, but also from the bottom
as well. Any debris in the foot well gets lifted out and sent
to the filters. |
|
|
